Re: [squid-users] squid3.0 STABLE16 cpu load again

В сообщении от Friday 20 November 2009 11:09:34 Angelo Höngens написал(а):
> On 20-11-2009 9:01, fedorischev wrote:
> > Hello Squid list !
> >
> > I having a problem with Squid CPU usage. The environment is described
> > below:
> >
> > VMWare ESXi guest system - CentOS 5.3 x86_64 running two Squid's. This
> > system have 3 Gb RAM,
> > two CPU's each other 3.40 GHz.
> > First Squid is running with RAM-cache size 1 Gb. Second Squid is running
> > without any cache and use first as parent cache. Both are
> > SQUID3.0-STABLE16.
> >
> > Here is some parts of config below:
> >
> > #first Squid: /etc/squid/squid.conf
> >
> > http_port 8080
> > acl QUERY urlpath_regex cgi-bin \?
> > cache deny QUERY
> > cache_mem 1024 MB
> > maximum_object_size 1024 KB
> > maximum_object_size_in_memory 1024 KB
> > cache_replacement_policy heap GDSF
> > memory_replacement_policy heap GDSF
> > cache_dir null /null
> > ...skipped access logs...
> >
> > #we use third-side mysql authorization program
> > auth_param basic program /usr/lib64/squid/mysql_auth
> > auth_param basic children 20
> > auth_param basic realm Squid proxy-caching web server
> > auth_param basic credentialsttl 20 second
> > auth_param basic casesensitive off
> >
> > ...skipped refresh patterns...
> >
> > ...skipped 34 ACL directives - non-regex based mainly
> >
> > http_reply_access allow all
> >
> > ...skipped log access...
> >
> > cache_effective_user nobody
> > visible_hostname proxy.bsu.edu.ru
> >
> > ...and something else
> >
> > #second Squid: /etc/squid-noauth/squid.conf
> >
> > http_port 8082
> > #use first parent
> > cache_peer localhost parent 8080 0 no-query
> > hierarchy_stoplist cgi-bin ?
> > #caching is disabled to everything
> > no_cache deny all
> > cache_mem 8 MB
> > cache_dir null /dev/null
> > ...skipping cache logs...
> > #in this Squid we have something more ACls - time-based mainly and a
> > little bit of regex-based
> > acl class0 src 172.18.31.1-172.18.31.199/32
> > acl class0_time time SMTWHFA 00:00-23:59
> > http_access allow class0 class0_time
> > #we have about 35 class sections described above
> > visible_hostname proxy1.bsu.edu.ru
> > memory_pools off
> > forwarded_for on
> >
> > ...about 7 delay pool classes
> >
> > It's not full configs, but I may present it if would be necessary.
> > The problem is not so simple: the second squid is periodically utilize
> > CPU and this is not depends on proxy users' activity. Usually this squid
> > load about 5-12 % CPU, but sometimes loading is hardly increasing - about
> > 70-90 % CPU (top reports it), while squidclient is reporting only 30-40%
> > load. Squid is continue working wery well under load, but why it's so
> > highly loading ? In any case, I repeat, this is not depends on users
> > activity.
> >
> > Here is squidclient report on this proxy:
> > # squidclient -p 8082 mgr:info
> >
> > HTTP/1.0 200 OK
> > Server: squid/3.0.STABLE16
> > Mime-Version: 1.0
> > Date: Fri, 20 Nov 2009 07:04:21 GMT
> > Content-Type: text/plain
> > Expires: Fri, 20 Nov 2009 07:04:21 GMT
> > Last-Modified: Fri, 20 Nov 2009 07:04:21 GMT
> > X-Cache: MISS from proxy1.bsu.edu.ru
> > X-Cache-Lookup: MISS from proxy1.bsu.edu.ru:8082
> > Via: 1.0 proxy1.bsu.edu.ru (squid/3.0.STABLE16)
> > Proxy-Connection: close
> >
> > Squid Object Cache: Version 3.0.STABLE16
> > Start Time: Thu, 19 Nov 2009 07:32:34 GMT
> > Current Time: Fri, 20 Nov 2009 07:04:21 GMT
> > Connection information for squid:
> > Number of clients accessing cache: 87
> > Number of HTTP requests received: 403810
> > Number of ICP messages received: 0
> > Number of ICP messages sent: 0
> > Number of queued ICP replies: 0
> > Number of HTCP messages received: 0
> > Number of HTCP messages sent: 0
> > Request failure ratio: 0.00
> > Average HTTP requests per minute since start: 286.0
> > Average ICP messages per minute since start: 0.0
> > Select loop called: -1040018272 times, -0.081 ms avg
> > Cache information for squid:
> > Hits as % of all requests: 5min: 0.0%, 60min: 0.0%
> > Hits as % of bytes sent: 5min: 0.4%, 60min: 1.4%
> > Memory hits as % of hit requests: 5min: 0.0%, 60min: 0.0%
> > Disk hits as % of hit requests: 5min: 0.0%, 60min: 0.0%
> > Storage Swap size: 0 KB
> > Storage Swap capacity: 0.0% used, 0.0% free
> > Storage Mem size: 256 KB
> > Storage Mem capacity: 3.1% used, 96.9% free
> > Mean Object Size: 0.00 KB
> > Requests given to unlinkd: 0
> > Median Service Times (seconds) 5 min 60 min:
> > HTTP Requests (All): 0.05633 0.04277
> > Cache Misses: 0.05633 0.04277
> > Cache Hits: 0.00000 0.00000
> > Near Hits: 0.00000 0.00000
> > Not-Modified Replies: 0.00000 0.00000
> > DNS Lookups: 0.00000 0.00000
> > ICP Queries: 0.00000 0.00000
> > Resource usage for squid:
> > UP Time: 84706.947 seconds
> > CPU Time: 54585.067 seconds
> > CPU Usage: 64.44%
> > CPU Usage, 5 minute avg: 0.28%
> > CPU Usage, 60 minute avg: 0.24%
> > Process Data Segment Size via sbrk(): 5696 KB
> > Maximum Resident Size: 0 KB
> > Page faults with physical i/o: 2
> > Memory usage for squid via mallinfo():
> > Total space in arena: 15188 KB
> > Ordinary blocks: 11857 KB 46 blks
> > Small blocks: 0 KB 0 blks
> > Holding blocks: 3572 KB 17 blks
> > Free Small blocks: 0 KB
> > Free Ordinary blocks: 3330 KB
> > Total in use: 15429 KB 82%
> > Total free: 3330 KB 18%
> > Total size: 18760 KB
> > Memory accounted for:
> > Total accounted: 4846 KB 26%
> > memPool accounted: 4846 KB 26%
> > memPool unaccounted: 13913 KB 74%
> > memPoolAlloc calls: 373989217
> > memPoolFree calls: 373985477
> > File descriptor usage for squid:
> > Maximum number of file descriptors: 1024
> > Largest file desc currently in use: 73
> > Number of file desc currently in use: 64
> > Files queued for open: 0
> > Available number of file descriptors: 960
> > Reserved number of file descriptors: 100
> > Store Disk files open: 0
> > Internal Data Structures:
> > 41 StoreEntries
> > 41 StoreEntries with MemObjects
> > 37 Hot Object Cache Items
> > 0 on-disk objects
> >
> >
> > And this is chunk of the "cache.log" that describes starting of squid:
> >
> > 2009/11/19 10:32:34| Starting Squid Cache version 3.0.STABLE16 for
> > x86_64-redhat-linux-gnu...
> > 2009/11/19 10:32:34| Process ID 6160
> > 2009/11/19 10:32:34| With 1024 file descriptors available
> > 2009/11/19 10:32:34| DNS Socket created at 0.0.0.0, port 33274, FD 10
> > 2009/11/19 10:32:34| Adding domain bsu.edu.ru from /etc/resolv.conf
> > 2009/11/19 10:32:34| Adding nameserver 172.16.1.1 from /etc/resolv.conf
> > 2009/11/19 10:32:34| Adding nameserver 172.24.1.1 from /etc/resolv.conf
> > 2009/11/19 10:32:34| User-Agent logging is disabled.
> > 2009/11/19 10:32:34| Referer logging is disabled.
> > 2009/11/19 10:32:35| Unlinkd pipe opened on FD 15
> > 2009/11/19 10:32:35| Local cache digest enabled; rebuild/rewrite every
> > 3600/3600 sec
> > 2009/11/19 10:32:35| Swap maxSize 0 + 0 KB, estimated 0 objects
> > 2009/11/19 10:32:35| Target number of buckets: 0
> > 2009/11/19 10:32:35| Using 8192 Store buckets
> > 2009/11/19 10:32:35| Max Mem size: 0 KB
> > 2009/11/19 10:32:35| Max Swap size: 0 KB
> > 2009/11/19 10:32:35| Using Least Load store dir selection
> > 2009/11/19 10:32:35| Set Current Directory to /var/spool/squid-noauth
> > 2009/11/19 10:32:35| Loaded Icons.
> > 2009/11/19 10:32:35| Accepting HTTP connections at 0.0.0.0, port 8082,
> > FD 14. 2009/11/19 10:32:35| HTCP Disabled.
> > 2009/11/19 10:32:35| Accepting SNMP messages on port 3402, FD 16.
> > 2009/11/19 10:32:35| Configuring Parent localhost/8080/0
> > 2009/11/19 10:32:35| Ready to serve requests.
> > 2009/11/19 10:32:35| Finished rebuilding storage from disk.
> > 2009/11/19 10:32:35| 0 Entries scanned
> > 2009/11/19 10:32:35| 0 Invalid entries.
> > 2009/11/19 10:32:35| 0 With invalid flags.
> > 2009/11/19 10:32:35| 0 Objects loaded.
> > 2009/11/19 10:32:35| 0 Objects expired.
> > 2009/11/19 10:32:35| 0 Objects cancelled.
> > 2009/11/19 10:32:35| 0 Duplicate URLs purged.
> > 2009/11/19 10:32:35| 0 Swapfile clashes avoided.
> > 2009/11/19 10:32:35| Took 0.30 seconds ( 0.00 objects/sec).
> > 2009/11/19 10:32:35| Beginning Validation Procedure
> > 2009/11/19 10:32:35| Completed Validation Procedure
> > 2009/11/19 10:32:35| Validated 25 Entries
> > 2009/11/19 10:32:35| store_swap_size = 0
> > 2009/11/19 10:32:36| storeLateRelease: released 0 objects
> >
> >
> > Any tips, tricks ? What I'm missing ? Thank you. Regards.
>
> Did you execute the steps described in the following document?
>
> VMware Self-Service- Timekeeping best practices for Linux guests
> (http://kb.vmware.com/kb/1006427)
>
> It could be that if your timekeeping is off and/or ntpd is not running
> to correct tick duration, top might report incorrect information.

Time synchronization through ntpd was(is) enabled - server time is correct.
And thank you for information about VMWare timekeeping. I'll try to apply
this recommendations & post results on list later.

Regards, Igor.
Received on Fri Nov 20 2009 - 09:01:55 MST