Re: [squid-users] WCCP

> From: Amos Jeffries <squid3_at_treenet.co.nz>
> Date: Mon, 19 Oct 2009 14:32:17 +1300
> Cc: "squid-users_at_squid-cache.org" <squid-users_at_squid-cache.org>
> Subject: Re: [squid-users] WCCP
>
> Ross Kovelman wrote:
>> I am going to be using WCCP. I did another reconfigure with the --enable
>> WCCP option. How can I check that it is on and running? The next step I
>> need to do is upgrade to version 2 since the Cisco only communicates on
>> version 2. I tried to do the patch < upgrade patch but then I get a
>> response with path to upgrade and I am not sure where the file is I need
>> patch.
>
> There is zero need to patch for support WCCPv2. It's been built into
> Squid for many years now.
>
> Run "./configure --help".
> * If it lists "--disable-wccpv2" there is no need to do anything.
> * If it lists "--enable-wccpv2" , add that to your build options.
> * If it does not mention "wccpv2" at all upgrade your Squid version.
>
> Then setup squid.conf with the relevant wccp2_* options.
>
> http://www.squid-cache.org/Doc/config/ or the wiki example configs have
> details on those.
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE7 or 3.0.STABLE19
> Current Beta Squid 3.1.0.14

Amos,

Thanks again.
Running the ./configure --help only says this:
 --disable-wccp Disable Web Cache Coordination V1 Protocol
 --disable-wccpv2 Disable Web Cache Coordination V2 Protocol

When I did the install I ran the ./configure --enable wccp option. I didn't
say --enable-wccpv2, does this matter? I also have this in the config:
wccp2_router 192.168.16.1
wccp2_forwarding_method 1
wccp2_return_method 1

I am running Squid Web Proxy 2.7.STABLE5.

Thanks
Received on Mon Oct 19 2009 - 03:44:55 MDT