[squid-users] Re: Re: Kerberos Authentication - Squid 3.1.0.13

Daniel,

  SLES11 has changed a bit (see the Novell forum others had also problems
finding devel packages). Some devel are on the 2nd SDK CD and possibly as
Henrik said libkrb5-devel.

Markus

"Daniel" <Squid_at_ZoomEmail.com> wrote in message
news:000a01ca1f72$bd6fe440$384facc0$@com...
> Amos,
>
> Thanks for your response. I have the following already installed:
>
> gssapi related:
> 'cyrus-sasl-gssapi'
> 'cyrus-sasl-gssapi-32bit'
> 'libgssglue1'
> 'librpcsecgss'
>
> krb related:
> 'krb5'
> 'krb5-32bit'
> 'krb5-client'
>
> I also looked through the config.log where Markus indicated and found the
> following errors in relation to gssapi:
>
> configure:4188: checking gssapi.h usability
> configure:4205: gcc -c -g -O2 conftest.c >&5
> conftest.c:54:20: error: gssapi.h: No such file or directory
> configure:4212: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
>
> configure:4230: checking gssapi.h presence
> configure:4245: gcc -E conftest.c
> conftest.c:21:20: error: gssapi.h: No such file or directory
> configure:4252: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
>
> configure:4299: checking for gssapi.h
> configure:4308: result: no
> configure:4188: checking gssapi/gssapi.h usability
> configure:4205: gcc -c -g -O2 conftest.c >&5
> conftest.c:54:27: error: gssapi/gssapi.h: No such file or directory
> configure:4212: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
>
> Any other ideas? Thanks!
>
> -----Original Message-----
> From: Amos Jeffries [mailto:squid3_at_treenet.co.nz]
> Sent: Friday, August 14, 2009 11:47 PM
> To: Daniel
> Cc: 'Markus Moeller'; squid-users_at_squid-cache.org
> Subject: Re: [squid-users] Re: Kerberos Authentication - Squid 3.1.0.13
>
> Daniel wrote:
>> Markus,
>>
>> First, please correct me if I'm wrong but I looked for 'gssapi.h' in
>> config.log and I'm assuming that config.log contains all the log
> information
>> from doing a /configure? Assuming that I am correct, I couldn't find
>> 'gssapi' anywhere inside the log file so I'm not sure if that's a good
> thing
>> or a bad thing.
>
> bad.
> config.log is supposed to contain a full dump of the output of
> ./configure when it was last run.
>
>>
>> I went ahead and dumped the output of the ./configure to a file and these
>> are the only lines that I could find for gssapi.h:
>>
>> checking gssapi.h usability... no
>> checking gssapi.h presence... no
>> checking for gssapi.h... no
>> checking gssapi/gssapi.h usability... no
>> checking gssapi/gssapi.h presence... no
>> checking for gssapi/gssapi.h... no
>>
>> If there's anything else that I could try, I'd greatly appreciate it.
>> Thanks!
>
> You could try installing the gssapi development libraries on your build
> machine. (sometimes called libkrb or libkrb5). Then re-running ./configure
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE6 or 3.0.STABLE18
> Current Beta Squid 3.1.0.13
>
>
Received on Mon Aug 17 2009 - 23:18:53 MDT