Re: [squid-users] tune up

Wennie V. Lagmay wrote:

> Ok then if my cache-dir is 3 as:
> cache_dir aufs /cache1/spool/squid 25000 16 256
> cache_dir aufs /cache2/spool/squid 25000 16 256
> cache_dir aufs /cache3/spool/squid 25000 16 256
>
> so if im going to recompile it it should be --enable-storeio="aufs"
> --with-aufs-threads=32
> am I correct?
>
dude you don't have to specify "--with-aufs-threads=32", squid will take
care of this

> thanks you,
>
> wennie
>
regards
askar

>
> ----- Original Message ----- From: "Askar" <askar@askarali.info>
> To: <squid-users@squid-cache.org>
> Sent: Monday, May 30, 2005 3:59 PM
> Subject: Re: [squid-users] tune up
>
>
>> Wennie V. Lagmay wrote:
>>
>>> Thank you very much Askar,
>>>
>>> Now it's the only the option --with-aufs-threads=1024 is not clear,
>>> what is this option and is 1024 value is ok, anybody can you please
>>> enlighten me?
>>>
>>> wennie
>>
>>
>> hi wennie,
>> I thinks you dont need to do anything fancy for
>> aufs, as i read in http://www.oreilly.com/catalog/squid/chapter/ch08.pdf
>>
>> according to the author squid will autmatically starts thread depends
>> on number of cache_dir.
>>
>> Table 8-1. Default number of threads for up to six cache directories
>> cache_dirs Threads
>> 1 16
>> 2 26
>> 3 32
>>
>> However for my 2 cache_dir I have ...
>> $ps -ef | grep squid | wc -l
>> 31
>>
>> of squid processes.
>>
>> regards
>>
>>
>>>
>>> ----- Original Message ----- From: "Askar" <askar@askarali.info>
>>> To: <squid-users@squid-cache.org>
>>> Sent: Monday, May 30, 2005 3:39 PM
>>> Subject: Re: [squid-users] tune up
>>>
>>>
>>>> Wennie V. Lagmay wrote:
>>>>
>>>>> Ok if im going to recompile it again, i just start squid and it
>>>>> should be working again right?
>>>>
>>>>
>>>>
>>>> yes
>>>>
>>>>> second if i recompile it --enable-storeio="aufs" do I need to
>>>>> enable --with-aufs-threads=1024 and is a 1024 value is ok?
>>>>
>>>>
>>>>
>>>> I don't have defined -with-aufs-threads=1024 options while
>>>> compiling squid and its working just cool
>>>>
>>>>>
>>>>> during recompilation, can I let squid running? aftrer I recompile
>>>>> it I sould only issue a command squid -z and suid start am I right?
>>>>
>>>>
>>>>
>>>> yep let squid serving clients, don't issue squid -z command no need
>>>> to do so. Before giving "make install" command for safty cp your
>>>> squid.conf file to another location if you want to reuse the same
>>>> squid.conf and then issue "make install" and place the squid.conf
>>>> in /usr/local/squid/etc, and change the cache_dir line only replace
>>>> diskd with aufs.
>>>> then shutdown the squid and restart it.
>>>>
>>>>>
>>>>> what is the posiblity that my squid will not start?
>>>>>
>>>> I'm sure it will start with no problem ;)
>>>>
>>>>> Thanks,
>>>>>
>>>>> Wennie
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> I'm affraid you have to recompile squid if you didnt enable aufs
>>>>>> eariler, you can check squid compilation option with "squid -v" ,
>>>>>> see if there "--enable-storeio=aufs,coss,diskd,ufs"
>>>>>> Again if you don't see aufs support then don't hestitate to
>>>>>> recompile squid.
>>>>>>
>>>>>> regards
>>>>>>
>>>>>> askar
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>
>
>
Received on Mon May 30 2005 - 07:29:04 MDT