Re: [squid-users] 802.1Q and SQUID : bug ! Don't use them together

The instructions for removing yourself from this list are in the
headers of ever single message
you receive from it. All you are doing by your actions is showing the
world that you are a
complete prat. Grow up!

On 1 Feb 2004, at 1:49, mortbox@gamebox.net wrote:

> i've asked to be removed countless times. here's another message that
> i didn't want. it's really not that hard to remove somebody is it...
>
> This is a forwarded message
> From: Koppen, Peter van <KPP@alfa-college.nl>
> To: squid-users@squid-cache.org
> Date: Tuesday, January 27, 2004, 9:44:05 AM
> Subject: [squid-users] 802.1Q and SQUID : bug ! Don't use them together
>
> ===8<==============Original message text===============
> I don't have a full understanding of SQUID or of 802.1Q on Linux but
> what is do know
> is regular .1Q configuration.
>
> I see that you use the real Ethernet port eth0 for VLAN 3 and use a
> vlan for all the
> other VLAN definitions. What is know of VLAN's this wil NOT work.
> Either you do not
> use VLAN's or you just use VLAN's So to make this work you should
> define a VLAN
> (VLAN3) for you gateway and not use the non-tagged etho interface.
>
> This can be tested, the proxy itself should not be able to connect to
> the pages you
> listed. nor be able to trace or ping beyond it's own interfaces.
>
> Peter
>
> On 21 Jan 2004 at 16:01, PINEAU Olivier wrote:
>
>> Hi !
>>
>> I want to inform you that i have discover a bug with 802.1Q
>> technologie and
>> SQUID.
>>
>> 802.1Q is for VLAN's :
>> the module 8021Q is use to configure a network card to be present on
>> different VLAN's (tagged port).
>>
>> My previous installation was :
>>
>> VLAN 3 on eth0
>> 10.0.0.0/255.254.0.0
>> routeur SDSL (gateway) 10.0.0.1
>>
>> VLAN 2 on eth0.2 (vconfig add eth0 2)
>> 10.20.0.0/255.255.0.0
>>
>> VLAN 1 on eth0.1 (vconfig add eth0 1)
>> 10.10.0.0/255.255.0.0
>>
>> With this configuration, i was ending weirds issues : i was not able
>> to log
>> in hotmail, yahoo!mail, e-bay, or perform any transaction on net.
>> For exemple, with hotmail, the https transaction was done and
>> recorded on
>> log, but the following url was not recorded in log and a basic error
>> message
>> prompt on navigator (DNS error or serveur not found).
>>
>> By despair, I change my network conf to use a different networdk card
>> for
>> each VLAN and it's finally works.
>> So, don't use 8021Q module with SQUID !
>>
>>
>> NOTE : I use 8021Q for my data serveur (SAMBA and netatalk) and it
>> works
>> fine
>>
>>
>>
>>
>
>
> met vriendelijke groet,
>
>
> --
> Peter van Koppen
>
> Functie : Specialist Netwerk- en systeembeheer
> Organisatie : Alfa-college
> E-mail : KPP@Alfa-college.nl
> TelefoonNr : +31(0)50-597 3054
> GSM : +31(0)6-53223700
>
>
> ===8<===========End of original message text===========
>
>
>
> --
> Best regards,
> mortbox mailto:mortbox@gamebox.net
>
>
>
--

========================================================================
=====
Graeme Wood Email: Graeme.Wood@ed.ac.uk
Unix Systems Support Phone: +44 131 650 5003
The University of Edinburgh Fax: +44 131 650 6552
========================================================================
=====
Received on Sun Feb 01 2004 - 02:57:37 MST