Re: [squid-users] newbie squid on LAN issues

On Sat, 6 Dec 2003, Mike Stupak wrote:

> routing tables i dont know much about so speak slowly and clearly...
> both machines seem to have 2 entries, the loopback and "default" (the
> router is the gateway for the default, genmask is all 0, and flags are
> UG). im guessing thats the problem?

Normally you have three..

loopback
local network
default

and both the loopback and local network routes are set up automatically
when the loopback and local network interfaces are brought up.

but if the default route was accepted then most likely everything is fine,
and the fact that ping works supports this, but your tcpdumps clearly show
that there is something seriously wrong with the traffic A->B.

Maybe the netmask is set wrongly on A or a similar error?

Regards
Henrik
Received on Sat Dec 06 2003 - 13:31:50 MST