AW: [squid-users] Winbind problem

Hi,

did you solve the problem?
I ahve nearly the same config as you, but the authentication doesn't work
With "+" and "\\" sperators.......

Regards
Thomas

> -----Ursprüngliche Nachricht-----
> Von: Tony Melia (DMS) [mailto:Tony.Melia@downsmicro.com.au]
> Gesendet: Mittwoch, 23. Juli 2003 00:31
> An: 'Henrik Nordstrom'; ''squid-users@squid-cache.org' '
> Betreff: RE: [squid-users] Winbind problem
>
>
> Using the wb_group from squid-2.5 Stable3. Any suggestions?
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Tuesday, 22 July 2003 05:46
> To: Tony Melia (DMS); ''squid-users@squid-cache.org' '
> Subject: Re: [squid-users] Winbind problem
>
>
> On Tuesday 22 July 2003 04.24, Tony Melia (DMS) wrote:
>
> > If squid could be changed to give 'mydomain+goodie ProxyUsers'
> > instead, this would solve my problem. Does squid 'look' at the
> > winbind seperator in smb.conf? As I think this may be
> where it stems
> > from, since if it knew what seperator was being used, it
> would use it
> > and not just use a slash.
>
> In case of Basic Squid just sends what the users sent.
>
> In case of NTLM it always uses backslash I think.
>
> Which version of wb_group are you using?
>
> --
> Donations welcome if you consider my Free Squid support
> helpful. https://www.paypal.com/xclick/business=hno%40squid-cache.org
>
> If you need commercial Squid support or cost effective Squid
> or firewall appliances please refer to MARA Systems AB,
> Sweden http://www.marasystems.com/, info@marasystems.com
>
>
> Downs MicroSystems Pty Ltd
> 145 Margaret Street
> Toowoomba Qld 4350
> Ph. (07) 4639 3344 Fax (07) 4639 3820
>
> Important Disclaimer and Warning
>
> Downs MicroSystems does not represent or warrant that any
> attached files are free from computer viruses or other
> defects. The attached files are provided, and may only be
> used, on the basis that the user assumes all responsibility
> for any loss, damage or consequences resulting directly or
> indirectly from use of the attached files. The liability of
> Downs MicroSystems in any event is limited to either the
> resupply of the attached files or the cost of having the
> attached files resupplied.
>
> NOTE: The views expressed by the individual in this message
> do not necessarily reflect those of the organisation.
>
> Downs MicroSystems is committed to protecting the privacy of
> individuals, and is bound by the principles of the
> Commonwealth Privacy Act (1988). Should you wish to view our
> Privacy Policy, please visit www.downsmicro.com.au.
>
> The information contained in this message is confidential and
> may be legally privileged. The message is intended solely for
> the addressee(s). If you are not the intended recipient, you
> are hereby notified that any use, dissemination, or
> reproduction is strictly prohibited and may be unlawful. If
> you are not the intended recipient, please contact the sender
> by return e-mail and destroy all copies of the original message.
>
>
Received on Fri Jul 25 2003 - 06:13:42 MDT