> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@marasystems.com]
> Sent: 22 May 2002 15:56
> To: Damian-Grint, Philip
> Cc: Squid-Users (E-mail)
> Subject: Re: [squid-users] 110 Timeouts
>
>
> I would strongly suspect that one of your firewalls or
> something at your ISP
> is not too happy about timestamp options..
I have checked the offending packets inside and outside the firewall, and
there has been no modification enroute... it looks likely that it must be
happening outside our network... however, before I can report anything, I
suppose I need to understand how the timestamp options work so I can check
for obvious protocol/field formatting errors...
>
> Is any of these firewalls doing NAT or anything else fancy?
>
Not with this particular host... it has a public IP address bound to the
ethernet card and a clean route out.
>
> 7.2 appears defaults to have ECN off, at least in the
> installations I have
> done.
>
I thought I read that, but possibly it was just that ecn is compiled into
the default RH7.2 kernel... I remember not being able to find it in the
standard RH7.1 dist.
>
> Please don't post packet dumps unless asked for..
>
my apologies
Regards
Phil DG
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
Received on Fri May 24 2002 - 08:33:48 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:08:13 MST