Re: [squid-users] squid 2.5 and Satellite

From my understanding the two are separate from each other and there is
not need to use both unless you want to set both TOS and the source IP.

Are you sure routing is properly set up in your network to allow packets
to find their way back to the proxy server?

What is the output of "netstat -n" when a dialup client has tried to
make a request?

--
Henrik Nordstrom
Squid Hacker
Edward wrote:
> 
> Hi Henrik!
> 
> Do I have to use :
> 
> # TAG: acl_map2_tos
> 
> # acl normal_service_net src 10.0.0.0/255.255.255.0
> 
> # acl good_service_net src 10.0.1.0/255.255.255.0
> 
> # acl_map2_tos allow normal_service_net 0x00
> 
> # acl_map2_tos allow good_service_net 0x20
> 
>                     WITH
> 
> # acl normal_service_net src 10.0.0.0/255.255.255.0
> 
> # acl good_service_net src 10.0.1.0/255.255.255.0
> 
> # acl_map2_outgoing allow normal_service_net 10.0.0.1
> 
> # acl_map2_outgoing allow good_service_net 10.0.0.2
> 
> 
> I have assign 64.110.11.2 to the nic card along w/ 200.50.68.7
> 
> I still cannot get the sat users to browse.
> 
> Please take a look at the squid-conf file I attach.
> 
> 
> Thank you very much.
> 
> Best regards,
> 
> Edward Millington
> (Network Administrator & Senior Technical Support Technician)
> Cariaccess Communications Ltd.
> Wildey
> St. Michael
> Barbados
> 1-246-430-7435
> Fax : 1-246-431-0170
> www.cariaccess.com
> 
>                              Name: Look At.txt
>               Part 1.2       Type: Plain Text (text/plain)
>                          Encoding: 7bit