Hello,
Over the weekend I decided to configure a parent proxy. Squid 1.1.9.
Everything went well or appeared to. The parent seems to be working
fine.
I changed my configuration for the machine that I had been using for
testing to use the new machine as it's parent. I had almost 500 Mb
in disk cache. It all seemed to work fine. This morning I only had
500k in the disk Cache the rest had been deleted and the cache refuses
to go over the 500k barrier.
Some of the things I did:
changed the refresh_pattern same on both machines. I was getting
.49 with 1440 60% 14400. Greedy, I guess.
"refresh_pattern . 2880 80% 14400"
Added the parent
"cache_host new.machine.mexcom.net parent 3128 3130 "
"single_parent_bypass on"
Raised Cache Memory from 32 to 48Megs
"cache_mem 48"
Protocol ObjectCount MaxKB CurrentKB MinKB HitRatio TransferKB/sec
Transfercount Transfered KB
HTTP 10 427605 61 0 0.48
0 38061 322181
I can't find any other changes. I assume that the parent can't be
affecting
this. The configuration is basically the same. This is the major
difference.
No single_parent_bypass only 32M cache_mem y 1000M Cache_swap and
"cache_host original.mexcom.net sibling 3128 3130 "
Thank you very much for any help.
Ed
Received on Mon Apr 07 1997 - 17:39:32 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:34:57 MST